Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 21 results ...
Abu Awwad, K (2020) The implementation of building information modelling Level 2 in the UK construction industry: the case of small and medium enterprises, Unpublished PhD Thesis, School of Energy, Construction and Environment, Coventry University.
Al-Saeed, Y W M (2018) Towards developing a sustainability assessment framework for residential buildings in Iraq, Unpublished PhD Thesis, , Coventry University.
Al-Werikat, G K E (2017) The impact of supply chain management on construction projects performance in Jordan, Unpublished PhD Thesis, School of Energy, Construction and Environment, Coventry University.
AlAbbadi, G (2020) Development of a framework towards enhancing workers productivity in the Jordanian construction industry, Unpublished PhD Thesis, , Coventry University.
Alhajeri, M (2011) Health and safety in the construction industry: challenges and solutions in the UAE, Unpublished PhD Thesis, Department of the Built Environment, Coventry University.
Banwo, O (2016) The development of a procurement decision support system to enhance construction claims management practice, Unpublished PhD Thesis, School of Energy, Construction and Environment, Coventry University.
Banwo, O O (2022) Development of a framework for building cost information management in Nigeria, Unpublished PhD Thesis, , Coventry University.
Briscoe, G (2008) Studies of the UK labour market with special reference to the construction sector, Unpublished PhD Thesis, Department of the Built Environment, Coventry University.
Charef, R (2019) A BIM-based framework to integrate a sustainable end-of-life into the asset lifecycle: towards the circular economy, Unpublished PhD Thesis, , Coventry University.
- Type: Thesis
- Keywords: circular economy; landfill; landfills; life cycle; natural resources; refurbishment; reuse
- ISBN/ISSN:
- URL: https://pureportal.coventry.ac.uk/en/studentthesis/a-bimbased-framework-to-integrate-a-sustainable-endoflife-into-the-asset-lifecycle(63cbecc2-e7ce-4684-9717-7f69875a6bf0).html
- Abstract:
The construction industry is infamous for having a tremendous negative impact on the natural environment. This includes its excess contribution of construction/demolition waste to landfill and its massive consumption of raw materials causing resource depletion. These factors contribute to the degradation of the natural environment. The linear economic system, where resources are extracted, used and disposed of, will not be able to prevent the depletion of natural resources and the saturation of landfills. The construction industry must make a radical change by adopting the Circular Economy approach and managing the End-of-Life (EOL) of buildings more sustainably to close the material loop and reduce dependence on natural resource extraction. Deconstruction or disassembly seems to be the most appropriate strategy for properly salvaging materials to be able to reuse or recycle them. This leads to designing the buildings with the additional objective of deconstructing them. However, the current most frequent definition of the asset life cycle goes from inception to in-use phases, including refurbishment, thereby leaving disposal as the main end of life option. This study aims to develop a BIM-based framework for integrating the sustainable End-of-Life phase into the asset lifecycle in the Circular Economy context. A mixed-method was adopted for the research using several techniques (literature reviews, systematic review, survey questionnaire, Pre-Interview Questionnaire and semi-structured interviews) with stakeholders involved during the asset lifecycle from France and the UK (20 interviewees, experts in SEOL and/or BIM). A descriptive statistical analysis and means comparison was performed for the questionnaire by using Statistical Package for the Social Science (SPSS) and Excel. The 20 interview analysis was performed by coding the transcripts through NVivo 12 software. Themes and concepts identified were based on the literature review findings. A BIM-based theoretical framework with Sustainable End-of-Life (SEOL) was drawn up based on the literature findings and was presented to the interviewees for improvements leading, as a result, to the creation of the conceptual framework. BIM uses were also identified from the interviews, discussed and compared with the existing BIM uses available in the literature. Structured like the "RIBA Plan of Work - Designing for Manufacture and Assembly", Guidelines for implementing the SEOL approach were summarized in a table mentioning recommendations for each stage. The key research findings revealed that: • There are several BIM dimensions having a different level of development. A consensus exists for 4D (planning) and 5D (costing), on what they refer to. However, there is a discrepancy between academics and practitioners for the 6D and 7D. More than 85% of practitioners allocated sustainability to 6D and Facility Management to 7D. No dimension is allocated to the EOL activities. • Extending BIM to include EOL could help to move from the Linear economy to Circular Economy. • The design stage is a key phase where all the stakeholders, in the asset lifecycle, must be involved. • The interviewees raised six categories of barriers: (1) economic barriers, (2) political barriers, (3) sociological barriers, (4) technical barriers, (5) Environmental barriers and (6) organizational barriers. • BIM has the potential to help the management of EOL sustainability: Eight new BIM Uses were identified that can be added to eight other useful BIM uses found in the Literature review. • The BIM-based framework has the potential to give an overview of who should be involved and when. It can be used by practitioners who want to adopt a SEOL or a Circular Economy approach. • Detailed guidelines for practitioners, are proposed and explained in each stage (from 0 to 8) of the SEOL strategy. BIM tasks for Designing for a Sustainable End-of-Life (DfSEOL) and procurement tasks for DfSEOL are also suggested.
Dike, I (2017) A critical exploration of the impact of building information modelling on the culture and performance of UK construction supply chains, Unpublished PhD Thesis, , Coventry University.
Gherbal, N E M (2015) The influence and evaluation of the project manager's performance in the Libyan construction industry, Unpublished PhD Thesis, School of Engineering and Computing, Coventry University.
Ghostin, M (2020) Exploring an implementation framework for building information modelling to support sustainable development in the Lebanese construction industry: a qualitative approach, Unpublished PhD Thesis, , Coventry University.
Hendy, A O A (2007) An approach to sustainable construction in post-disaster contexts: with specific reference to the Marmara region of Turkey, Unpublished PhD Thesis, Department of the Built Environment, Coventry University.
Hermawan, F (2015) A strategic approach to enhancing sustainable practices in public building projects: a case study of Indonesian local authorities, Unpublished PhD Thesis, School of Energy, Construction and Environment, Coventry University.
Karami, S (2008) Using by-product industrial materials to replace all cement in construction products, Unpublished PhD Thesis, Department of Built Environment, Coventry University.
Lashford, C (2016) Modelling the role of SuDS management trains to minimise the flood risk of new-build housing developments in the UK, Unpublished PhD Thesis, School of Energy, Construction and Environment, Coventry University.
Li, P (2017) The international competitiveness of Chinese construction firms, Unpublished PhD Thesis, Royal Agricultural University, Coventry University.
Noruwa, B I (2020) Application and effects of emerging technologies on variation minimisation in the UK construction projects, Unpublished PhD Thesis, , Coventry University.
Nosheen, A (2022) Development of an effective claim management framework for the UK construction industry, Unpublished PhD Thesis, , Coventry University.
Swai, L (2022) Development of a conceptual framework for enhancing payment practices in the UK construction industry, Unpublished PhD Thesis, , Coventry University.
Tabatabaei Sameni, S (2019) Overheating investigation in UK social housing flats built to the Passivhaus standard, Unpublished PhD Thesis, School of Art and Design, Coventry University.